Xerox 2006NPC DocuColor 2006 Problem Solving - Page 56

24. Problem Solving Network Problem Solving General printing problems If this happens: Try this: You cannot connect to the Printer. Make sure that the Printer is not being calibrated from the Control Panel. If the Printer is being calibrated from the Control Panel, you can select it in the Chooser, but you cannot connect to it. This ensures that only one person is calibrating the server at any time and that print jobs do not use unexpected calibration. You cannot select or view one of Have your system administrator enable the queues. the queue in Setup. You cannot connect to the Printer Make sure the connection is configured from a Windows computer with correctly. the Fiery utilities. Printing seems to take too long. Print to a queue instead of to the Direct connection. When you print to a queue, the job is stored on the Printer until it can be processed and printed. When you print to the Direct connection, the job cannot be sent to the Printer until the previous job is finished processing, so you must wait longer to use your computer. One or more Media Type options Select a Paper Source that supports are dimmed. the Media Type you are using. For information on requirements and constraints pertaining to special papers and transparencies, refer to the chapter Print options. The DocuColor 2006 does not respond to a Print command. • Has someone disconnected the Printer by selecting Suspend Printing from the Functions menu? If the administrator or operator has selected Suspend Printing on the Printer Control Panel to interrupt printing, your print job will not resume until someone selects Resume Printing from the Functions menu on 24-56 Xerox DocuColor 2006