Xerox 2006NPC DocuColor 2006 Problem Solving - Page 42

24. Problem Solving Sorter/Stacker Error messages Invalid for Stack. Remove papers from High Cap. Remove papers from Sorter. Sort and Stack are selected. Load originals in Document Feeder. Sorter is available up to 10 sets. Sorter malfunction. Stack is available up to 30 copies. Stack is full. Remove papers. Stacker is full. The selections (such as paper size) you made for the job are not valid for stacking. Redirect the job to the top tray or change the selections so the job may be sent for stacking. 500 sheets are in the high capacity bin. Remove the sheets from the high capacity bin and continue copying. The capacity of the Exit Tray (bin 1) or other bins has been reached. Remove the sheets from the bins and continue copying. The Sorter/Stacker is ready to receive the job. Load the originals in the Document Feeder and run the job. The desired number of sets exceeds the sorting limit. Decrease the number to 10 and run the remaining sets as part of another job. A problem has occurred in the Sorter. Examine the job specifications and any output. Rerun the job, if possible. If you are unable to proceed, call for service. The capacity of the output bins (30 sheets of 20 lb/ 64 gsm paper) has been exceeded. Remove the paper from the bins and continue running the job. Bin capacity has been reached. Remove the sheets from the bins and continue copying Bin capacity has been reached in the high capacity bin. Remove the sheets from the high capacity bin and continue copying. 24-42 Xerox DocuColor 2006