Xerox 6180N User Guide - Page 108

Symptom, Reason/Action, See the Xerox Support website - fuser unit

Page 108 highlights

Print-Quality Problems Symptom Reason/Action Blank pages Two or more sheets may be feeding at once. Remove the paper stack from the tray, fan it, and reinsert it. The print cartridges are not Xerox print cartridges. Verify that the print cartridges (C/M/Y/K) meet specifications, and replace if necessary. The transfer unit is old or damaged. Replace the transfer unit. The high-voltage supply is defective. See the Xerox Support website, www.xerox.com/office/6180support, for assistance. Hair-like marks appear in or around black half-tone printing Shadows appear around areas of dense black printing The paper was left unwrapped for a long time (especially in a dry environment). Replace the paper. See About Paper on page 4-5. The paper is outside the recommended specification range. Replace the paper with a recommended size and type, and confirm that your print driver settings are correct. See About Paper on page 4-5. The transfer unit is old or damaged. Replace the transfer unit. Color around the edge of printing is incorrect The color registration is incorrect. Adjust the color registration. See Color Registration on page 6-6. Colored dots are The print cartridge is dirty. printed at regular Clean the print cartridge. intervals (about 28 mm) Partial blanks, creased paper, or blotted printing The paper is damp. Replace the paper. The paper is outside the recommended specification range. Replace the paper with a recommended size and type. See About Paper on page 4-5. The transfer unit, or fuser, is not installed correctly. Reinstall the transfer unit and/or fuser. The print cartridges are not Xerox print cartridges. Verify that the print cartridges (C/M/Y/K) meet specifications, and replace if necessary. Condensation inside the printer causes partial blanks or creased paper. Turn the printer on, and leave it on, for at least one hour to get rid of the condensation. If the problems still occurs, see the Xerox Support website, www.xerox.com/office/6180support, for assistance. Phaser® 6180 Color Laser Printer 6-4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158

Print-Quality Problems
Phaser® 6180 Color Laser Printer
6-4
Blank pages
Two or more sheets may be feeding at once.
Remove the paper stack from the tray, fan it, and reinsert it.
The print cartridges are not Xerox print cartridges.
Verify that the print cartridges (C/M/Y/K) meet specifications, and replace if
necessary.
The transfer unit is old or damaged.
Replace the transfer unit.
The high-voltage supply is defective.
See the Xerox Support website,
www.xerox.com/office/6180support
, for
assistance.
Hair-like marks appear
in or around black
half-tone printing
Shadows appear
around areas of dense
black printing
The paper was left unwrapped for a long time (especially in a dry
environment).
Replace the paper. See
About Paper
on page 4-5.
The paper is outside the recommended specification range.
Replace the paper with a recommended size and type, and confirm that
your print driver settings are correct. See
About Paper
on page 4-5.
The transfer unit is old or damaged.
Replace the transfer unit.
Color around the edge
of printing is incorrect
The color registration is incorrect.
Adjust the color registration. See
Color Registration
on page 6-6.
Colored dots are
printed at regular
intervals (about 28 mm)
The print cartridge is dirty.
Clean the print cartridge.
Partial blanks, creased
paper, or blotted
printing
The paper is damp.
Replace the paper.
The paper is outside the recommended specification range.
Replace the paper with a recommended size and type. See
About Paper
on page 4-5.
The transfer unit, or fuser, is not installed correctly.
Reinstall the transfer unit and/or fuser.
The print cartridges are not Xerox print cartridges.
Verify that the print cartridges (C/M/Y/K) meet specifications, and replace if
necessary.
Condensation inside the printer causes partial blanks or creased paper.
Turn the printer on, and leave it on, for at least one hour to get rid of the
condensation. If the problems still occurs, see the Xerox Support website,
www.xerox.com/office/6180support
, for assistance.
Symptom
Reason/Action