Xerox 7300DX Specialty Printing - Page 8

Specialty Printing Transparencies Transparencies can be printed from Tray 1 or the Multi-Purpose Tray. Handle transparencies by the edges and with both hands to avoid fingerprints and creases, which can cause poor print quality. Videos are available with instructions for loading transparencies. Videos are located on the Interactive Documentation CD-ROM and on the Xerox web site at: www.xerox.com/officeprinting/7300support Xerox Phaser 35-Series Transparencies Xerox recommends that you use Phaser 35-Series Transparencies, which have been specifically developed for use with this type of printer fuser. Xerox Phaser 35-Series Transparency Film Item Premium Premium Standard Standard Size A/Letter (U. S.) 8.5 x 11 in. A4 (Metric Letter) 210 x 297 mm A/Letter (U. S.) 8.5 x 11 in. A4 (Metric Letter) 210 x 297 mm Description 50 sheets 50 sheets 50 sheets 50 sheets Part Number 016-1896-00 016-1897-00 016-1894-00 016-1895-00 To order supplies and accessories, contact your local reseller or visit the Xerox web site at: www.xerox.com/officeprinting/7300supplies Using non-Phaser 35-Series transparency film The printer features a unique oil-less fuser. Phaser 35-Series Premium Transparency film is designed specifically to work with the printer's fuser. If you want to use non-Phaser 35-Series transparency film, you must use a film that meets the following specifications: I Compatible with oil-less fuser systems I Fusing temperature: 165 degrees C Transparency film that does not meet these specifications can produce poor image quality, produce a jam in the printer, wrap around the fuser rollers and even melt on the fuser rollers. Some non-Phaser 35-Series transparencies have paper tape on the edge that can separate in the heat of the fuser, leading to damage. Using non-Phaser 35-Series transparencies may damage the fuser. Damage caused by using non-Phaser 35-Series transparencies might not be covered under the warranty, service agreement, or Total Satisfaction Guarantee. Note Xerox and Xerox Phaser transparency films developed for other Xerox printers and copiers are not meant to be used with this printer. Using non-Phaser 35-Series transparencies may damage the fuser and might not be covered under the warranty. Phaser® 7300 Color Printer 19