Yamaha 820 Owner's Manual - Page 19

The Effect (CLP-880/860/840) The [EFFECT] button allows you to select one of the effects that can give your sound greater depth and animation. CHORUS SYMPHONIC TREMOLO DELAY EFFECT CHORUS SYMPHONIC TREMOLO DELAY EFFECT SONG SELECT -/NO +/YES To select an effect type press the [EFFECT] button a few times until the indicator corresponding to the desired type lights (the indicators light in sequence each time the [EFFECT] button is pressed). No effect is produced when all indicators are off. OFF No effect is selected when no EFFECT indicator is lit. CHORUS Shimmering, broadening effect SYMPHONIC Adds a deep, symphonic backdrop TREMOLO Tremolo effect DELAY Echo effect NOTE • The default effect type (including OFF) and depth settings are different for each voice. Adjusting Effect Depth Effect depth can be individually adjusted for the selected voice by using the [-/NO] and [+/YES] buttons while holding the [EFFECT] button. The depth range is from 0 through 20 (the current depth setting appears on the LED display while the [EFFECT] button is held). A setting of "0" produces no effect, while a setting of "20" produces maximum effect depth. Press the [-/NO] and [+/YES] buttons simultaneously while holding the [EFFECT] button to recall the default setting for the current voice (the default depth settings are different for each voice). Brilliance (CLP-880/860/840) This control can be used to change the tonality or "timbre" of the sound output. The control range is from MELLOW to BRIGHT. BRILLIANCE BRIGHT For a brighter or "sharper" tone, slide the control towards the BRIGHT position. For a "rounder" more mellow tone, slide the control towards the MELLOW position. MELLOW NOTE • When the BRILLIANCE is set to BRIGHT, the overall sound will be slightly louder. If the MASTER VOLUME is set at a high level the sound may become distorted. If so, lower the MASTER VOLUME level. CLP-880/860/840/820/820S 19