Yamaha 820 Owner's Manual - Page 59
Install the main unit A., WATCH YOUR, FINGERS WHEN DOING
View all Yamaha 820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
5 10 cm A q Be sure to place your hands at least 10 centimeters from either end of the main unit when positioning it. 10 cm 6 x 16 mm flat-head screws 5 A D B Install the main unit (A). Place the main unit (A) on the side panels (D) with the screws on its bottom panel (toward the rear of the main unit) just behind the grooves in the brackets located at the top of the side panels. Then slide the main unit forward until it stops. WATCH YOUR FINGERS WHEN DOING THIS!! Align the holes on the bottom panel of the main unit with the holes in the brackets on the side panels (also center the main unit to produce equal clearance on the left and right sides, as shown in the illustration), then use the four 6 x 16 millimeter flat-head screws 5 to attach the main unit. Two screws can be attached from the front side and two screws from the rear. • Do not hold the keyboard in any position other than the position shown in the above illustration. • Fingers can become pinched between the main unit and the rear or side panels, be extra careful so as not to drop the main unit. 59 CLP-880/860/840/820/820S