Yamaha 820 Owner's Manual - Page 27
The Function Mode, To Select a Function
View all Yamaha 820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
The Function Mode The [FUNCTION] button provides access to a range of functions that give the Clavinova extraordinary versatility. The functions are categorized in groups as follows: CLP-840/ CLP-880/ 820/820S 860 F1 F1 Tuning 28 F2 F2 Scale 28 F3 F3 Dual Mode Functions 29 - F4 Split Mode Functions 30 F4 - Left Pedal Mode 32 - F5 Pedal Functions 32 F5 F6 Metronome Volume 33 F6 F7 Piano Song Part Cancel Volume 33 F7 F8 MIDI Functions 34 F8 F9 Backup Functions 37 FUNCTION TEMPO FUNCTION q Operation Example Press [+/YES] (sub-mode) Use FUNCTION [] Press [-/NO] or [+/YES] once Use [-/NO], [+/YES] To Select a Function Z Press the [FUNCTION] button so that its indicator lights. NOTE • Functions cannot be selected during demo/piano song playback or when the recorder is in operation. X Use the FUNCTION [] buttons to select the desired function: F1 through F8 on the CLP-840/820/820S; F1 through F9 on the CLP-880/860. C In the case of the Scale (F2), Dual Mode (F3), Split Mode (F4: CLP-880/860), Pedal Functions (F5: CLP-880/860), MIDI (F7: CLP-840/820/820S, F8: CLP-880/860), and Backup (F8: CLP-840/ 820/820S, F9: CLP-880/860) functions, you will have to press the [+/YES] button once to enter the respective sub-mode after the function has been selected, and then use the FUNCTION [] buttons again to select the desired sub-function. NOTE • The Dual or Split (CLP-880/860) mode must be engaged before the F3 and F4 functions can be selected, respectively. If the corresponding mode is not engaged, "F3.-" or "F4.-" will appear on the display and the corresponding sub-mode will not be available. • The Dual mode can be engaged while in the Function mode, but the Function mode must be exited before the Split mode (CLP-880/860) can be engaged. V Set the function as required by using the [-/NO] and [+/YES] buttons (see the individual function descriptions, below). NOTE • After selecting the function, the current setting will be displayed when the [-/NO] or [+/YES] button is pressed for the first time. B Press the [FUNCTION] button so that its indicator goes out to exit from the function mode. CLP-880/860/840/820/820S 27