Yamaha 820 Owner's Manual - Page 57

2 D q If applicable, align the cut corner of the bracket with the corresponding cutouts on the feet. 3 D 6 x 20 mm round-head screws 2 D D C 5 x 40 mm long gold screws 1 X Assemble the side panels (D) and feet (E). Secure the feet (E) to the side panels (D) with the 5 x 40 millimeter long gold-colored screws 1 (3 each). Depending on the unit type, the feet (E) may or may not have cutouts. If the feet have cutouts, make sure that the cutouts on the feet face the bracket side of the side panels. C Attach (C). the side panels (D) to the pedal box Before installing the pedal box, untie and straighten out the bundled cord attached to the bottom of the pedal box. Don't discard the vinyl tie, you'll need it later in step N. Place the pedal box on top of the brackets attached to the side panels (D), and attach using the four 6 x 20 millimeter roundhead screws 2 - two screws on each side. Make sure the pedals extend in the same direction as the feet. 57 CLP-880/860/840/820/820S