Yamaha AV-S70 Owner's Manual - Page 14

CONNECTIONS s Connecting a TV (monitor) to enjoy digital audio Connect one of these Optical fiber cable (EIA standard) (commercially available) INPUT MARK Front speaker unit DIGITAL 2 ( /PCM) AUX L DIGITAL 1 ( /PCM) TV VIDEO THROUGH OUT SUBWOOFER R SYSTEM CONNECTOR Audio connection cord (1 pin) (commercially available) TV (monitor) Anti-dust cap Anti-dust cap Remove the cap covering the DIGITAL 1 terminal (optical) when connecting an optical fiber cable. Safely store the cap and always re-insert it in the terminal when the terminal is not in use. (This cap prevents the entrance of dust.) VIDEO IN COAXIAL DIGITAL OUTPUT OPTICAL DIGITAL VIDEO OUT DVD player, LD player, etc. Connect the optical terminal or coaxial terminal of the LD or DVD player to the DIGITAL 1 (optical) terminal or DIGITAL 2 (coaxial) terminal of the front speaker unit using a commercially available optical fiber cable or audio connection cord (1 pin). Notes • You need to make digital connection between this unit and your component to enjoy a Dolby Digital source. • The audio of the LD or DVD player can be heard from the front speaker unit, but not from the TV speakers. The audio of the LD or DVD player cannot be heard when the front speaker unit's power is turned off. • If your LD player has a Dolby Digital RF signal output terminal, be sure to use the RF demodulator (separately purchased). • No sound will be heard when connecting your LD player's Dolby Digital RF signal output terminal directly to this unit's DIGITAL 2 terminal. 12