Yamaha BD-S2900 Owners Manual - Page 19

English LINKED OPERATIONS WITH THE TV PLAYBACK What is linked operations with the TV This unit has a convenient function that offers linked operations that control equipment through HDMI. You can use this function by connecting TV and/or amplifier/receiver with an HDMI cable. See the operating instructions for connected equipment for operational details. • With linked operations with the TV, you can do the following: 1. Automatic input switching 2. Power on link 3. Power off link See below for the details. • This unit offers linked operations with a Panasonic TV with VIERA Link or EZ Sync™. • Non-HDMI-compliant cables cannot be utilized. ■ Preparation 1 Connect this unit to your TV or amplifier/receiver with an HDMI cable (] 4-5). 2 Set "HDMI Control" to "On" (] 20). (The default setting is "Off".) 3 Set the linked operations on the connected equipment (e.g., TV). 4 Turn on all connected equipments and select this unit's input channel on the connected TV so that the linked operations work properly. Also when the connection or settings are changed, repeat this procedure. What you can do with linked operations with the TV ■ Automatic input switching When the following operations are performed, the television will automatically switch the input channel and display the corresponding action. - When play starts on the unit - When an action that uses the display screen is performed (e.g., Direct Navigator screen) ■ Power on link When the television is off and the following operations are performed, the television will automatically turn on and display the corresponding action. - When play starts on the unit - When an action that uses the display screen is performed (e.g., Direct Navigator screen) ■ Power off link All connected equipment compatible with linked operation through HDMI, including this unit, automatically turns off when you switch the television off. • This unit automatically turns off even during playback or any other operation. ■ Playing music continuously even after turning off power to the television (] 14) Notes • When [ ] (PLAY) is pressed on this unit for "Automatic input switching" or "Power on link", the playback image is not immediately displayed on the screen and it may not be possible to watch the contents from where playback started. • In this case, press [ ] or [ ] to go back to where playback started. Easy control only with Panasonic TV (VIERA) remote control If you connect this unit to a TV that has "HDAVI Control 2" or "HDAVI Control 3" function with an HDMI cable, you can operate this unit using the following buttons on the TV remote control OK], [RETURN], [SUB MENU] and colored buttons Use the remote control for this unit to operate any other buttons (numbered buttons, etc.) that are not listed above. • Refer to the TV operating instructions for operating TV. ■ Using the FUNCTIONS menu to operate this unit By using the TV remote control, you can play media e.g., using the FUNCTIONS menu. 1 Press the button for VIERA Link or EZ Sync™ on the remote control. BD Player FUNCTIONS DVD-Video 2 Select the player. • The FUNCTIONS menu is displayed. Top Menu Menu SD card Other Functions SUB MENU OK RETURN When you want to leave the TV on and set only this unit to standby mode Press [ STANDBY/ON] on this unit's remote control and set to standby mode. When not using linked operations with the TV Set "HDMI Control" in the Setup menu to "Off". (] 20) ■ Using the sub menu to operate this unit By using the TV remote control, you can play discs using the "Control Panel" and display the Top Menu (for BD-Video and DVD-Video) or Pop-up Menu (for BD-Video). 1 Press [SUB MENU]. ➜ This can also be displayed by using the VIERA menu screen. Note You cannot use the sub menu while the Top Menu for BD-Video or DVD-Video is displayed. e.g., Control Panel Screen Aspect Top Menu Pop-up Menu SUB MENU OK RETURN 2 Select an item, then press [OK]. Control Panel Screen Aspect Top Menu Menu Pop-up Menu Rotate Right Rotate Left Zoom in Zoom out Control Panel is displayed. Follow the indications on the screen. (] 10) Top menu is displayed. Menu is displayed. Pop-up menu is displayed. Rotate the still picture. Enlarge or shrink the still picture. 15 En