Yamaha HTR-5440 Owner's Manual - Page 40

DTS SET (DTS LFE level), 7 SP DLY TIME (center delay), 8 DISPLAY SET, 9 MEM. GUARD (memory guard)

Page 40 highlights

SET MENU 6 DTS SET (DTS LFE level) This setting is effective only when this unit decodes DTS signals. Use this feature to adjust the output level of the LFE (lowfrequency effect) channel when playing back a DTS signal. The LFE signal carries the low-frequency special effect sound which is only added to certain scenes. Control range (dB): -10 to +10 Initial setting: 0 dB dB Note • Adjust the LFE level according to the capacity of your subwoofer. 7 SP DLY TIME (center delay) Use this feature to adjust the delay of the center channel sound. This feature works when this unit decodes a Dolby Digital or DTS signal. Ideally, the center speaker should be the same distance from the listening position as the left and right main speakers. However, in most home situations, the center speaker is placed in line with the main speakers. By delaying the sound from the center speaker, the apparent distance from the center speaker to the listening position can be adjusted to make it seem the same as the distance between the left and right main speakers to the listening position. Adjusting the delay time for the center speaker is especially important for giving depth to the dialog. Control range (ms): 0 to 5 Initial setting: 0 ms 8 DISPLAY SET I DIMMER You can adjust the brightness of the display. Control range : -4 to 0 Initial setting: 0 9 MEM. GUARD (memory guard) Use this feature to prevent accidental changes to the setting of the SET MENU and other settings on this unit. Choices: ON, OFF Initial setting: OFF Select ON to protect the following features: • All SET MENU items • Center, rear speakers and subwoofer levels • Delay time adjusted by using TIME/LEVEL Notes • When "9 MEM. GUARD" is set to ON, you cannot use the test tone. • When "9 MEM. GUARD" is set to ON, you cannot select any other SET MENU items. ms Center speaker image C L C R RL RR y • Increasing the delay by 1 ms simulates moving the speaker about 30 cm (one foot) farther away from the actual position of the center speaker. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

36
SET MENU
ms
6
DTS SET (DTS LFE level)
This setting is effective only when this unit decodes DTS
signals.
Use this feature to adjust the output level of the LFE (low-
frequency effect) channel when playing back a DTS signal.
The LFE signal carries the low-frequency special effect
sound which is only added to certain scenes.
Control range (dB):
10 to +10
Initial setting: 0 dB
Note
Adjust the LFE level according to the capacity of your subwoofer.
7
SP DLY TIME (center delay)
Use this feature to adjust the delay of the center channel
sound. This feature works when this unit decodes a Dolby
Digital or DTS signal. Ideally, the center speaker should be
the same distance from the listening position as the left and
right main speakers. However, in most home situations, the
center speaker is placed in line with the main speakers. By
delaying the sound from the center speaker, the apparent
distance from the center speaker to the listening position can
be adjusted to make it seem the same as the distance
between the left and right main speakers to the listening
position. Adjusting the delay time for the center speaker is
especially important for giving depth to the dialog.
Control range (ms): 0 to 5
Initial setting: 0 ms
dB
L
C
C
R
RL
RR
Center speaker image
y
Increasing the delay by 1 ms simulates moving the speaker
about 30 cm (one foot) farther away from the actual position of
the center speaker.
8
DISPLAY SET
DIMMER
You can adjust the brightness of the display.
Control range :
4 to 0
Initial setting: 0
9
MEM. GUARD (memory guard)
Use this feature to prevent accidental changes to the setting
of the SET MENU and other settings on this unit.
Choices: ON, OFF
Initial setting: OFF
Select ON to protect the following features:
All SET MENU items
Center, rear speakers and subwoofer levels
Delay time adjusted by using TIME/LEVEL
Notes
When
9 MEM. GUARD
is set to ON, you cannot use the test
tone.
When
9 MEM. GUARD
is set to ON, you cannot select any
other SET MENU items.