Yamaha HTR-5440 Owner's Manual - Page 59

INTRODUCTION PREPARATION BASIC OPERATION ADVANCED OPERATION SPECIFICATIONS (HTR-5440) AUDIO SECTION • Minimum RMS Output Power for Main, Center, Rear 20 Hz to 20 kHz, 0.06% THD, 8 ohms 65 W • Maximum power 1 kHz, 0.7% THD, 8 ohms [U.S.A. and Canada models 80 W [Europe, U.K., Australia, Singapore, China and General models 75 W • DIN Standard Output Power [Europe model only] 1 kHz, 0.7% THD, 4 ohms 95 W • IEC Output Power [Europe model only] 1 kHz, 0.06% THD, 8 ohms 67 W • Maximum Power (EIAJ) [China and General models] 1 kHz, 10% THD, 8 ohms 95 W • Dynamic Power (IHF) 8/6/4/2 ohms [U.S.A. and Canada models 95/115/135/155 W [China and General models 90/110/130/150 W • Damping Factor 20 Hz to 20 kHz, 8 ohms 60 or more • Frequency Response CD, etc. to MAIN L/R 20 Hz to 20 kHz, ±5 dB • Total Harmonic Distortion CD, etc. to MAIN L/R (Effect Off, 20 Hz to 20 kHz, 30 W, 8 ohms 0.025% or less • Signal to Noise Ratio (IHF-A Network) CD, etc. to MAIN L/R (Effect Off, 250 mV, shorted 100 dB or more • Residual Noise (IHF-A Network) Main L/R 150 µV or less • Channel Separation CD, etc. to MAIN L/R (1 kHz 60 dB (10 kHz 45 dB • Tone Control (Main L/R) BASS Boost/Cut 10 dB/50 Hz TREBLE Boost/Cut 10 dB/20 kHz • Phones Output 470 mV/390 ohms • Input Sensitivity CD, etc 150 mV/47 kohms 6CH INPUT 150 mV/47 kohms • Maximum Input Signal CD, etc. (1 kHz, 0.5% THD 2.2 V or more • Output Level REC OUT 150 mV/1.2 kohms SUBWOOFER 4.0 V/1.2 kohms VIDEO SECTION • Video Signal Type [U.S.A., Canada, China and General models NTSC [Europe, U.K., Australia and Singapore models PAL • Composite Video Signal Level 1 Vp-p/75 ohms • Signal to Noise Ratio 50 dB or more • Frequency Response (MONITOR OUT) Composite 5 Hz to 10 MHz, -3 dB FM SECTION • Tuning Range [U.S.A. and Canada models 87.5 to 107.9 MHz [Europe, U.K., Australia, Singapore, China and General models 87.50 to 108.00 MHz • 50 dB Quieting Sensitivity (IHF, 100% mod.) Mono/Stereo 2.0 µV (17.3 dBf) /25 µV (39.2 dBf) • Alternate Channel Selectivity (400 kHz 70 dB • Signal to Noise Ratio (IHF) Mono/Stereo 76 dB/70 dB • Harmonic Distortion (1 kHz) Mono/Stereo 0.2%/0.3% • Stereo Separation (1 kHz 48 dB • Frequency Response 20 Hz to 15 kHz, +0.5, -2.0 dB AM SECTION • Tuning Range [U.S.A. and Canada models 530 to 1710 kHz [Europe, U.K., Australia and Singapore models] ..... 531 to 1611 kHz [China and General models] 10 kHz step 530 to 1710 kHz 9 kHz step 531 to 1611 kHz • Usable Sensitivity 300 µV/m GENERAL • Power Supply [U.S.A. and Canada models AC 120 V/60 Hz [Australia model AC 240 V/50 Hz [Europe, U.K., and Singapore models AC 230 V/50 Hz [China model AC 220 V/50 Hz [General model AC 110/120/220/240 V, 50/60 Hz • Power Consumption [U.S.A. model 200 W [Canada model 210 W/280 VA [Europe, U.K., Australia, Singapore China and General models 210 W Standby Mode [U.S.A. and Canada models 0.90 W [Europe, U.K., Australia, Singapore and China models] ..... 0.96 W • Maximum Power Consumption [General model only] 5-ch, 10% THD 480 W • AC Outlets 2 (SWITCHED) [U.S.A., Canada and Singapore models] .... Total 100 W maximum [China and General models Total 50 W maximum 1 (SWITCHED) [Australia model Total 100 W maximum • Dimension (W x H x D 435 x 151 x 390 mm • Weight 9.5 kg • Accessories Remote Control Batteries AM loop antenna Indoor FM antenna Quick Reference Card Connection Guide * Specifications are subject to change without notice. APPENDIX English 55