Yamaha MX-A5200 MX-A5200 Owner s Manual - Page 13
INPUT XLR jack, BAL/UNBAL switch, About the XLR jacks
View all Yamaha MX-A5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
7 INPUT (XLR) jack For connecting to a pre-amplifier with XLR output jacks (p.14). To use the XLR jack, set the corresponding BAL/UNBAL switch to "BAL". When connecting an XLR balanced cable, match the pins and insert the "male" connector of the cable until you hear a click. XLR balanced cable (male) 8 INPUT (RCA) jack For connecting to a pre-amplifier with RCA output jacks (p.14). To use the RCA jack, set the corresponding BAL/UNBAL switch to "UNBAL". RCA cable UNBAL. BAL. BAL. UNBAL. RCA short pin • When disconnecting the cable from the unit, hold down the PUSH button on the unit and then pull the connector out. About the XLR jacks • The pin assignments for the XLR jacks of the unit are shown below. Before connecting an XLR balanced cable, refer to the instruction manual of your pre-amplifier and verify that its XLR output jacks are compatible with the pin assignments. 2. HOT 1. GND 3. COLD • Remove the RCA short pins attached to the INPUT (RCA) jacks before making connections. Be sure to keep them in a place inaccessible to small children who may accidentally swallow small parts. • To protect against noise contamination, we recommend attaching the RCA short pins when the INPUT (RCA) jacks are not in use. 9 BAL/UNBAL switch Switches between XLR input and RCA input for each channel (p.14). Part names and functions En 13