Yamaha MX-A5200 MX-A5200 Owner s Manual - Page 16
Connecting the power cable, Turning on/off the unit, Using a Y-shaped lug connector
View all Yamaha MX-A5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Using a Y-shaped lug connector a Loosen the speaker terminal. b Insert the Y-shaped lug connector into the groove between the knob and base part of the terminal. c Tighten the terminal. b c Use a Y-shaped lug with the following size. a 6.5 mm (0.26 in) or more Connecting the power cable After all the connections and switch operations are complete, connect the supplied power cable to the unit and then to an AC wall outlet. The unit (rear) ASSIGN CH.4 AMP ASSIGN CH.3 CH.3 BRIDGE CH.6 AMP ASSIGN CH.5 CH.2 SURROUND BACK L CH.4 FRONT PRESENCE L CH.6 REAR PRESENCE L BRIDGE ( ) BRIDGE ( ) SURROUND CH.4 FRONT PRESENCE A CH.3 FRONT B AC IN CH.2 SURROUND BACK To an AC wall outlet Turning on/off the unit Press z (power) to turn on/off the unit. When the unit is turned on, the power indicator lights up. The unit (front) 16 En Connections z (power) • When an external device is connected to the TRIGGER IN jack, the unit is set to standby mode after z (power) is pressed. If you turn on the external device, the unit automatically turns on by the trigger function (p.18).