Yamaha NX-N500 NX-N500 Owners Manual - Page 82

Table of status indicator conditions English Indications during playback Color Green Pink Lit Flashing Slow flashing Fading every 3 seconds Lit Slow flashing Condition 1 second 3 second 1 second 3 second 1 second 1 second Blue Lit Slow flashing 1 second Sky blue Lit Slow flashing 1 second Purple Lit Slow flashing 1 second White All colors listed above Lit Flashing (example) (example) Fading every 2 seconds 2 second 1 second 1 second 1 second 2 second Status The network input is selected. A network connection is being set up. See page p.18, 20, 21 p.12 No connection is established with the network. p.12 Audio is being received from the MusicCast CONTROLLER. p.18, 20, 21 The unit is connected to an iOS device (AirPlay). p.23 The iOS device settings are being shared and a connection has been established wirelessly (Wireless Accessory p.15 Configuration). The Bluetooth input is selected. Bluetooth cannot be paired. p.24 The USB input is selected. No PC is connected to the USB jack. p.26 The optical digital input is selected. No device is connected to the OPTICAL jack. p.27 The AUX input is selected. p.27 The volume setting is changed. - Speaker output is muted. - Indications concerning the system Color Orange Yellow Lit Lit Flashing White Slow flashing Fading every 3 seconds Condition 1 second 3 second 1 second 3 second Indications when the error occurred Color Orange Slow flashing Condition 1 second 1 second Flashes twice Slow flashing Red Repeatedly flashes twice Repeated flashes three times 1 second 1 second 1 second 1 second Status The unit is in standby mode. The unit is in network standby mode. A new firmware update is available. The firmware is being updated. The firmware has been successfully updated. See page - p.11 p.28 Status Check the connections of the right speaker. See page p.9 No presets have been registered. p.22 The AC power supply cable is not firmly connected to the AC wall outlet. Connect the AC power supply cable firmly to p.10 the AC wall outlet. The protection circuitry has been activated. Turn off the unit, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center. p.33 The firmware download cannot be found. Check that this unit is connected to the network. An error occurred during firmware updating. To restart updating, press WIRELESS DIRECT on the rear panel. p.28