Yamaha ProR3 ProR3 Owners Manual - Page 22

18 Advanced uses (2) - Editing functions - Program parameters 1 (Primary effects) Reverberation (Reverb) Key Parameter Value Description MAIN RevTime IniDelay HighRatio LowRatio Diffusion 0.3 ~ 99.0 s 0.1 ~ 200.0 ms X0.1 ~ X1.0 X0.1 ~ X2.4 0 ~ 10 Reverb time of primary reverberation (the time required for 60 dB of decay at 1 kHz) Delay time until the primary reverb begins Reverb time of the high frequency components of the reverb; relative to RevTime Reverb time of the low frequency components of the reverb; relative to RevTime Spread of the reverb sound FINE Reverb Type ER/REV Balance ER/REV Delay Liveness Density HPF LPF Rev2 Time Rev2 Delay *2 Rev2 Level *2 Mod Freq Mod Depth Mod Delay Common parameters *1 Type of reverb tone 0/100 ~ 100/0 Level balance between early reflections and reverb 0.1 ~ 100.0 ms Time difference between beginning of early reflections and beginning of reverb 0 ~ 10 Decay characteristics of early reflections; 0:dead, 10:live 0 ~ 100 Density of the early reflections Thru, 40 Hz ~ 1.0 kHz Cutoff frequency of the high pass filter 400 Hz ~ 20 kHz, Thru Cutoff frequency of the low pass filter X0.1 ~ X10.0 Decay time of the secondary reverb; relative to primary reverb 0.0 ~ 100.0 ms Time difference between primary reverb and secondary reverb 0 ~ 100% Level of secondary reverb; relative to primary reverb 0.05 ~ 40.00 Hz Frequency of reverb modulation 0 ~ 100% Depth of reverb modulation 0.1 ~ 30 ms Shorter values produce modulation in the high range, longer values in the low range. Refer to "Common parameters" on page 27 *1 Small Hall, Large Hall, Vocal plate, Perc.Plate, Spring, Echo Room, Strings, Snare, Reverb Flange *2 Only when the input mode is either L-Mono, R -Mono, or LR-Mix. ProR3 Digital Reverberator