Yamaha ProR3 ProR3 Owners Manual - Page 39
Assigning MIDI controllers, Transmitting a MIDI bulk dump
View all Yamaha ProR3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Advanced uses (3) - Utility functions - 35 Transmitting a MIDI bulk dump The ProR3 allows you to transmit any type of data as a bulk dump; memory, program memory (all programs or a specified program), banks, user ER, or system memory. 1. Repeatedly press the UTILITY key until the MIDI Bulk Out page appears. MIDI Bulk Out All Press ENTER 2. Use the CURSOR keys (√) (®) to select a parameter. 3. Press the INC or DEC key to select the value. All Program Bank UserER System U01-U90, All A-D, All A-D, All All data (Program, Bank, UserER, System) The data of the specified USER program. If All is selected, data for all USER programs. The data of the specified Bank program change table. If All is selected, data for all Bank data. The specified User ER data If All is selected, all User ER data. System data settings made for utility functions such as Input Mode, etc. 4. Press the RECALL/ENTER key to execute the bulk dump. Before you begin transmission, make sure that the MIDI device to which the ProR3 is connected is ready to receive a bulk dump. Assigning MIDI controllers Here's how to assign MIDI control numbers to the two controllers. The ProR3 can respond to two controllers, and a separate page is provided to make settings for each controller. 1. Repeatedly press the UTILITY key until one of the controller assign pages appears. Controller-1 Assign OFF 2. Press the INC or DEC key to specify the control number. The parameter selected in "Setting MIDI control parameters" of page 16 can be controlled in realtime by receiving the specified control change message. ProR3 Digital Reverberator