Yamaha QL5 Reference Manual - Page 22
DIRECT OUT screen 8ch, PORT SELECT window, DIRECT OUT PATCH button
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
DIRECT OUT screen (8ch) 4 1 Input and output patching PORT SELECT window Displayed when you press the DIRECT OUT PATCH button in the one-channel or the eightchannel INSERT/DIRECT OUT window. Set the output port used for direct output. 2 1 2 3 1 DIRECT OUT ON button Switches the Direct Out on or off. The currently-selected Direct Out point is indicated above the button. 2 DIRECT OUT PATCH button Displays the currently-selected Direct Out output port. Press this button to open the PORT SELECT window, in which you can select an output port. 3 DIRECT OUT LEVEL knob Indicates the output level of the Direct Out. You can use the [TOUCH AND TURN] knob to adjust the level. 4 Close button Closes the screen. 3 1 Category select list Selects the category of output port. The categories correspond to the following output ports. The displayed categories vary depending on the channel type. • OUTPUT/DIGITAL/REC.........OMNI OUT1-OMNI OUT16 (QL5), OMNI OUT1-OMNI OUT8 (QL1), DIGITAL OUT L/R, RECORDER IN(L/R) • SLOT1 SLOT1(1)-SLOT1(16) • SLOT2 SLOT2(1)-SLOT2(16) • DANTE1-32 DANTE1-DANTE32 • DANTE33-64 DANTE33-DANTE64 (QL5 only) 2 Output port select buttons Assign the output port used for direct output of the currently-selected INPUT channel. 3 CLOSE button Closes the window. 22 Reference Manual