Yamaha YSP 3000 Owner's Manual - Page 24

Connections Before connecting components ■ Cables used for connections Audio/Video A HDMI cable Audio Audio pin cable (supplied) (White) (Red) Optical cable (supplied) (White) (Red) Digital audio pin cable (supplied) (Orange) (Orange) 3.5 mm stereo mini plug cable 5 Subwoofer pin cable Video OSD video pin cable (supplied) (Yellow) (Yellow) ■ Notes on connecting the optical cable • Pull out the cap before connecting the optical cable. When you are not using the optical cable, be sure to put the cap back in place. • When inserting the cable into the optical digital jack, make sure the direction is correct. Cap ■ Affixing cables To prevent cables from becoming unplugged, place the supplied cable clamp with the open side facing upward, attach it to the rear panel of this unit in a suitable position, and then affix cables in the cable clamp. Optical cable Attach to this unit ■ Information on HDMI™ Audio Signals Input source DVD video DVD audio Blu-ray Disc HD DVD Audio signal type Dolby Digital, DTS, PCM 2-channel stereo (up to 96 kHz/24 bit) Dolby Digital, DTS, PCM Notes • When CPPM copy-protected DVD audio is played back, video and audio signals may not be output depending on the type of DVD player. • This unit is not compatible with HDCP-incompatible HDMI or DVI components. y • We recommend that you use an HDMI cable shorter than 5 m (16 ft) with the HDMI logo printed on it. • Use a conversion cable (HDMI jack ↔ DVI-D jack) to connect this unit to other DVI components. ■ Priority order for audio input signals When multiple types of audio signals are simultaneously being input from a single source component, this unit plays back the audio signals in the following priority order: HDMI → Digital → Analog As default settings, the following input jacks are assigned to the corresponding input sources: Input jack Input source TV/STB DVD AUX 1 AUX 2 AUX 3 HDMI Digital Analog 20 En