ZyXEL ES-4124 User Guide - Page 336

Chapter 45 Introducing Commands 45.7 Privilege Levels You can use a command whose privilege level is equal to or less than that of your login account. For example, if your login account has a privilege level of 12, you can use all commands with privilege levels from 0 to 12. 0 privilege level commands are available to all login accounts. " If you use an external RADIUS server to authenticate users, you can use a VSA (Vendor Specific Attribute) to configure a privilege level for an account on the RADIUS server. See Section 23.2.4 on page 199 for more information. Use the following commands to specify privilege levels for login accounts. Syntax: logins username password logins username privilege where username password privilege = Specifies a new user (up to 32 alphanumeric characters). Enter a user name to change the settings of an existing account. = Specifies the new password (up to 32 alphanumeric characters) for this user. = Assigns a privilege level for the user. 45.8 Command Modes There are three command modes: User, Enable and Configure. The modes (and commands) available to you depend on what level of privilege your account has. See Section 45.7 on page 336 for more information on setting up privilege levels. When you first log into the command interpreter with a read-only account (having a privilege of 0 to 12), the initial mode is the User mode. The User mode commands are a subset of Enable mode commands. The User mode command prompt ends with an angle bracket (>). To enter Enable mode, type enable and enter the administrator password when prompted (the default is 1234). When you enter Enable mode, the command prompt changes to the pound sign (#). If you log into the command interpreter as an administrator you automatically enter Enable mode. 336 ES-4124 User's Guide