ZyXEL ES-4124 User Guide - Page 408
broadcast-limit, bandwidth-limit
View all ZyXEL ES-4124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 408 highlights
Chapter 48 Interface Commands An example is shown next. • Enable ports 1, 3, 4 and 5 for configuration. • Set the BPDU control to tunnel, to forward BPDUs received on ports one, three, four and five. sysname(config)# interface port-channel 1,3-5 sysname(config-interface)# bpdu-control tunnel sysname(config-interface)# 48.2.4 broadcast-limit Syntax: broadcast-limit broadcast-limit where broadcast- = Enables broadcast storm control limit on the Switch. limit = Limits how many broadcast packet the interface receives per second. An example is shown next. • Enable port one for configuration. • Enable broadcast control. • Set how many broadband packets the interface receives per second. sysname(config)# interface port-channel 1 sysname(config-interface)# broadcast-limit sysname(config-interface)# broadcast-limit 21 48.2.5 bandwidth-limit The bandwidth-limit command enables bandwidth control on the Switch. Syntax: bandwidth-limit bandwidth-limit pir bandwidth-limit cir bandwidth-limit egress where pir = Sets the maximum bandwidth allowed for incoming traffic. cir = Sets the guaranteed bandwidth allowed for incoming traffic. egress = Sets the maximum bandwidth allowed for outgoing traffic (egress) on the Switch. An example is shown next. 408 ES-4124 User's Guide