ZyXEL ES-4124 User Guide - Page 347
Ip|vid|port]
View all ZyXEL ES-4124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 347 highlights
Chapter 45 Introducing Commands Table 140 Command Summary: Enable Mode (continued) COMMAND DESCRIPTION PRIVILEGE protocol-basedvlan Displays the protocol based 3 VLAN settings for the specified port(s). ip Displays IP related information. 0 arp Displays the ARP table. 3 dvmrp group Displays DVMRP group 3 information. dvmrp interface Displays DVMRP interface 3 information. dvmrp neighbor Displays DVMRP neighbor 3 information. dvmrp prune Displays the DVMRP prune 3 information. dvmrp route Displays the DVMRP routes. 3 igmp group Displays multicast group details 3 for each port(s). igmp interface Displays IGMP settings for each 3 IP interface. igmp multicast Displays details about known and 3 unknown multicast frames passing through the Switch on the specified port(s). igmp timer Displays IGMP counter and timer 3 settings for each IP interface. iptable all [IP|VID|PORT] Displays the IP address table. 3 You can sort the table based on the IP address, VLAN ID or the port number. iptable count Displays the number of IP 3 interfaces configured on the Switch. iptable static Displays the static IP address 3 table. ospf database Displays OSPF link state 3 database information. ospf interface Displays OSPF interface settings. 3 ospf neighbor Displays OSPF neighbor 3 information. protocol-based- Displays protocol based VLAN 3 vlan settings on the port(s). route Displays IP routing information. 3 route static Displays IP static route 3 information. source binding Displays the static bindings (IP to 3 MAC address) configured on the Switch. ES-4124 User's Guide 347