ZyXEL ES-4124 User Guide - Page 85
Port Setup
View all ZyXEL ES-4124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Chapter 7 Basic Setting Table 11 Basic Setting > IP Setup (continued) LABEL DESCRIPTION Apply Click Apply to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Cancel Click Cancel to reset the fields to your previous configuration. IP Interface Use these fields to create or edit IP routing domains on the Switch. IP Address Enter the IP address of your Switch in dotted decimal notation for example 192.168.1.1. This is the IP address of the Switch in an IP routing domain. IP Subnet Enter the IP subnet mask of an IP routing domain in dotted decimal notation. For Mask example, 255.255.255.0. VID Enter the VLAN identification number to which an IP routing domain belongs. Add Click Add to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Cancel Click Cancel to reset the fields to your previous configuration. Index This field displays the index number of an entry. IP Address This field displays IP address of the Switch in the IP domain. Subnet Mask This field displays the subnet mask of the Switch in the IP domain. VID This field displays the VLAN identification number of the IP domain on the Switch. Delete Click Delete to remove the selected entry from the summary table. Cancel Note: Deleting all IP subnets locks you out from the Switch. Click Cancel to clear the Delete check boxes. 7.7 Port Setup Use this screen to configure Switch port settings.Click Basic Setting > Port Setup in the navigation panel to display the configuration screen. ES-4124 User's Guide 85