ZyXEL FSG1100HN User Guide - Page 17
Front Panel LEDs and WPS Button, COLOR, STATUS, DESCRIPTION, Power, WLAN/WPS, Internet - pass
View all ZyXEL FSG1100HN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 2 The WPS Button The following table describes the LEDs and the WPS button. Front Panel LEDs and WPS Button LED Power WAN COLOR Green Red Green WLAN/WPS Green Internet Orange Green STATUS On Off On On Blinking Off On Blinking Off Blinking On Blinking DESCRIPTION The FSG1100HN is receiving power and functioning properly The FSG1100HN is not receiving power. A system error has occurred. The FSG1100HN has a successful 10/100Mbps WAN connection. The FSG1100HN is sending/receiving data through the WAN. The WAN connection is not ready, or has failed. The FSG1100HN is ready, but is not sending/receiving data through the wireless LAN. The FSG1100HN is sending/receiving data through the wireless LAN. The FSG1100HN is negotiating a WPS connection with a wireless client. The FSG1100HN is not ready or has failed. The FSG1100HN's WPS connection is being configured. The FSG1100HN's IP is connected (the device has a WAN IP address from IPCP or DHCP and fiber is linked or a static IP address is configured, PPP negotiation has successfully completed - if used - and fiber is linked) and no traffic is detected. If the IP or PPPoE session is dropped due to an idle timeout, the light will remain green if a fiber connection is still present. If the session is dropped for any other reason, the light is turned off. The light will turn red when it attempts to reconnect and DHCP or PPPoE fails. The FSG1100HN's IP is connected and IP traffic is passing through the device (either direction), flashing at 4 Hz with a 50% duty cycle. FSG1100HN User's Guide 17