ZyXEL FSG1100HN User Guide - Page 54
Enable the PPTP Pass Through on VPN connection feature.
View all ZyXEL FSG1100HN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Chapter 5 WAN Attain DNS Automatically Click to attain DNS automatically. Otherwise, enter DNS manually using the field below. Set DNS Manually Enter the DNS server IP address(es) assigned by the ISP. DNS1-DNS3 Enter the DNS server IP address(es) assigned by the ISP. Clone MAC Address Enable MAC address cloning. Enable UPnP Enable IGMP Proxy Enable the Universal Plug and Play (UPnP) feature. Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a network, obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a device can leave a network smoothly and automatically when it is no longer in use. Enable the IGMP proxy feature. IGMP proxy enables the device to issue IGMP host messages on behalf of hosts that the device discovered through standard IGMP interfaces. Enable Ping Access on WAN Enable the Ping access on WAN feature. This allows Ping to use the WAN to send ICMP echo request packets to the target host and listen for ICMP echo response replies. Enable Web Server Enable the Web server access on WAN feature. This allows Access on WAN Web server access via the WAN. Enable Multicast Shortcut Enable IPSec Pass Through on VPN Connection Enable the Multicast shortcut feature. IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish membership in a multicast group - it is not used to carry user data. The FSG1100HN supports both IGMP version 1 and IGMP version 2. At start up, the FSG1100HN queries all directly connected networks to gather group membership. After that, it periodically updates this information. Enable the IPSec Pass Through on VPN connection feature. This encapsulates a complete IP datagram, forming a virtual tunnel between IPSec-capable devices. Enable PPTP Pass Enable the PPTP Pass Through on VPN connection feature. Through on VPN Point-to-Point Tunneling Protocol (PPTP) enables secure Connection transfer of data through a Virtual Private Network (VPN). Enable L2TP Pass Through on VPN Connection Enable the L2TP Pass Through on VPN connection feature. Layer 2 Tunneling Protocol (L2TP) is used to support data transfer through a Virtual Private Network (VPN). It relies on an encryption protocol that it passes within the tunnel to provide privacy. Apply Click Apply to save your changes back to the FSG1100HN. Refresh Click Refresh to begin configuring this screen afresh. 54 FSG1100HN User's Guide