ZyXEL FSG1100HN User Guide - Page 32
Wireless Basic Settings Screen, LABEL, DESCRIPTION, 4 GHz B+G+N, GHz N, Multiple AP, 20MHz
View all ZyXEL FSG1100HN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Chapter 4 Wireless LAN 4.4 Wireless Basic Settings Screen The Wireless Basic Settings window allows users to configure the Wireless LAN Interface. Click Wireless > Basic Settings to open the Wireless Basic Settings screen. Wireless > Basic Settings The following table describes the basic wireless labels in this screen. Wireless > Basic Settings LABEL DESCRIPTION Wireless Basic Settings Wireless LAN Interface Enable or disable the wireless LAN interface on the FSG1100HN. Band Choose the proper operating frequency for the wireless network. The options are: 2.4 GHz (B+G+N) for networks using a mix of 802.11b, 802.11g, and 802.11n wireless clients, 2.4 GHz (G+N) for networks using a mix of 802.11g and 802.11n wireless clients, 2.4 GHz (B+G) for networks using a mix of 802.11b and 802.11g wireless clients, 2.4 GHz (N) for networks using 802.11n wireless clients only, 2.4 GHz (G) for networks using 802.11g wireless clients only, or 2.4 GHz (B) for networks using 802.11b wireless clients only. Mode Choose the desired mode. The option is AP. Click the Multiple AP button to open the Multiple AP table, as shown on the next page. Up to four APs can be enabled and configured on this table. SSID Enter a descriptive name for the Service Set Identity (SSID) associated with the wireless station. All wireless stations associating with the access point built-in to the FSG1100HN must have the same SSID. Channel Width Select the channel width. Select 20MHz if no 802.11n wireless clients are being used. A standard 20 MHz channel offers transfer speeds up to 150Mbps whereas a 40 MHz channel uses two standard channels and offers speeds up to 300Mbps. As not all wireless devices support 40 MHz channels, most users select Auto 20/40MHz to allow the 32 FSG1100HN User's Guide