ZyXEL FSG1100HN User Guide - Page 31

Chapter 4 Wireless LAN 4.2 What You Can Do • Use the Basic screen (32) to configure the basic wireless settings, including to enable the Wireless LAN, select the band, display the currently configured multiple APs, enter the SSID, select the channel width, set the control sideband, select a channel number, enable broadcast SSID, set the data rate, and display active clients. • Use the Advanced screen (35) to configure the fragment threshold, RTS threshold, preamble type, IAPP, B/G protection, frame aggregation, short GI, block intra-BSS traffic, and RF output power. • Use the Security screen (37) to select and configure the wireless security mode on your wireless network. • Use the Access Control screen (44) to enable access control on your wireless network. • Use the Wi-Fi Protected Setup screen (44) to configure WPS on your wireless network. 4.3 What You Should Know Every wireless network must follow these basic guidelines. • Every wireless client in the same wireless network must use the same SSID. The SSID is the name of the wireless network. It stands for Service Set IDentity. • If two wireless networks overlap, they should use different channels. Like radio stations or television channels, each wireless network uses a specific channel, or frequency, to send and receive information. • Every wireless client in the same wireless network must use security compatible with the AP. Security stops unauthorized devices from using the wireless network. It can also protect the information that is sent in the wireless network. FSG1100HN User's Guide 31