ZyXEL FSG1100HN User Guide - Page 49
WAN for DHCP Client Screen, Networking > WAN > DHCP Client, Networking
View all ZyXEL FSG1100HN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
5.3 Chapter 5 WAN WAN for DHCP Client Screen Dynamic Host Configuration Protocol (DHCP), based on RFC 2131 and RFC 2132, allows individual clients to obtain TCP/IP configuration at start-up from a server. Users can configure the FSG1100HN's LAN as a DHCP server or disable it. When configured as a server, the FSG1100HN provides the TCP/IP configuration for the clients. If DHCP service is disabled, another DHCP server must be available on that network, or the computer will need to be manually configured. Click Networking > WAN > DHCP Client to open the WAN screen for DHCP Client (the default WAN screen). Networking > WAN > DHCP Client The following table describes the WAN DHCP client labels in this screen. Networking > WAN > DHCP Client LABEL DESCRIPTION WAN Settings WAN Access Type Choose DHCP Client. The other options are Static IP or PPPoE. Attain DNS Automatically Click to attain DNS automatically. Otherwise, enter DNS manually using the field below. Set DNS Manually Enter the DNS server IP address(es) assigned by the ISP. DNS1-DNS3 Enter the DNS server IP address(es) assigned by the ISP. Clone MAC Address Enable MAC address cloning. Enable UPnP Enable the Universal Plug and Play (UPnP) feature. Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a network, obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a device can leave a network smoothly and automatically when it is no longer in use. Enable IGMP Proxy Enable the IGMP proxy feature. IGMP proxy enables the device to issue IGMP host messages on behalf of hosts that FSG1100HN User's Guide 49