2008 BMW 6 Series Owner's Manual - Page 102

Technology for comfort, convenience and safety > "Zoom": At higher speeds, the image is zoomed in. > "Curve mode": Depending on the steering angle and other parameters, the image sections follow the course of the road to some degree. Due to the system's need to adjust periodically, a still image is displayed at certain intervals for fractions of a second. This is normal and not an indication of a problem. To prevent driving without headlamps, at a speed of more than approx. 3 mph/5 km/h and when dark, the thermal image on the Control Display is only shown when the low beams are on. > "Full screen": The image is shown on the entire Control Display. > "Contrast": The contrast of the screen can be adjusted. > "Brightness": The brightness of the screen can be adjusted. "Curve mode" can only be activated with the "Zoom" function switched on. With "Full screen" activated, "Curve mode" and "Zoom" cannot be selected.< The settings are stored for the remote control currently in use. To exit the menu: The image will automatically disappear after approx. 5 seconds. Deactivating BMW Night Vision > Press the > Press the button. button. > Press the button on the steering wheel. > Via iDrive, refer to Selecting settings. Selecting settings iDrive, for explanation of principle, refer to page 16. 1. Activate BMW Night Vision. 2. Press the controller to display the menu items. Cleaning camera The function of the camera may be affected by heavy rain and fog, dirt, snow or ice on the lens. When this occurs, the displayed image on the Control Display may become gray. 3. Select the menu item and press the controller: > "Night Vision off": Deactivate BMW Night Vision. 100 Online Edition for Part no. 01 41 0 014 242 - © 08/07 BMW AG To minimize icing, the camera lens is automatically heated. However, it may be necessary to clean the camera lens manually under severe weather conditions. When doing so, cautiously remove any debris, ice or snow. To avoid dam-