2008 BMW 6 Series Owner's Manual - Page 99
2008 BMW 6 Series Manual
Page 99 highlights
4. Select "Display settings" and press the controller. 5. Change to upper field if necessary. Turn the controller until "Head-Up Display" is selected and press the controller. 6. Change into the second field from the top. Turn the controller until "Head-Up Display" is selected and press the controller. 7. Select desired information of Head-Up Display. Press the button. 8. Press the controller. The information is shown on the HeadUp Display. The settings are stored for the remote key currently in use. Setting brightness The brightness of the display is automatically adapted to the ambient lighting conditions. However, you can change the base setting. With the low beams switched on, the brightness can also be adjusted with the knurled wheel of the instrument lighting. iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Display settings" and press the controller. 5. Change to upper field if necessary. Turn the controller until "Head-Up Display" is selected and press the controller. 1 2 Navigation instructions Display > Cruise control > Active cruise control > Leaving lane warning 3 Speed Selecting displays iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 97 Online Edition for Part no. 01 41 0 014 242 - © 08/07 BMW AG Reference Mobility Communications Entertainment Navigation Switching on/off Driving tips Controls At a glance