2008 BMW 6 Series Owner's Manual - Page 167

7. Press the controller. The station is stored. 5. Turn the controller until the desired memory position is selected. The number of the memory position appears beside the name or frequency of the station. 6. Press the controller. The station is stored. RDS Radio Data System In the FM frequency range, additional information is transmitted via RDS. If the reception conditions are good, the station names are shown on the Control Display. If the reception is weak or disrupted, it can take some time before the station names are displayed. From radio readiness, the stations are saved for the remote control used at the moment. With programmable memory/ direct selection buttons You can also store a station on the programmable memory/direct selection buttons, also refer to page 21. 1. Select a station. 2. ton...Press and hold desired but- Switching RDS on/off* 1. Select "FM" and press the controller. "Set" is selected. 2. Press the controller. Other menu items are displayed. 3. Select "RDS" and press the controller. Changing a memory position 1. Select "Presets" and press the controller. 2. Select the desired station. "Set" is selected. 3. Press the controller. Other menu items are displayed. 4. Select "Store" and press the controller. RDS is activated. The setting is stored for the remote control currently in use. Automatically sorting stations* Mobility Reference For the "All stations" selection criterion, you can set whether the most frequently used stations are displayed at the beginning. 1. Select "All stations" and press the controller. "Set" is selected. 165 Online Edition for Part no. 01 41 0 014 242 - © 08/07 BMW AG Communications Entertainment Navigation Driving tips The stations of the last selection criterion are displayed once again after a short time. Controls At a glance