2008 BMW 6 Series Owner's Manual - Page 65

the transmission lock after parking the vehicle at its destination. Locking 1. Pull out the screwdriver upward. The transmission lock is locked again. Releasing 1. Unclip the sleeve of the selector lever. 2. Pull the sleeve up over the selector lever. 2. Reinstall the cover and the trim piece. Information on jump starting and towing from page 228. 3. Reach into the trim-piece opening, arrow 1, and firmly pull the trim piece upward, arrow 2. 4. Remove cover over the opening, refer to 5. 5. Insert a screwdriver from the onboard tool kit, refer to page 223, into the opening, arrow 1. 1 2 3 High beams Headlamp flasher Turn signals Using turn signals Move the lever beyond the resistance point. To switch off manually, only press the lever to the resistance point. 63 Online Edition for Part no. 01 41 0 014 242 - © 08/07 BMW AG Reference 6. Pull the screwdriver toward the rear until it is heard to engage, arrow 2, and leave it inserted in the opening. The transmission lock is released. Signaling briefly Press the lever to the resistance point and hold it there as long as you wish to signal. Mobility Atypically rapid flashing of the indicator lamp indicates the failure of a turn signal lamp.< Communications Entertainment Navigation Turn signals/ headlamp flasher Driving tips Controls At a glance