2008 BMW 6 Series Owner's Manual - Page 85

The setting is stored for the remote control currently in use. Setting 12h/24h format 1. Select "Time format" and press the controller. 3. Turn the controller until "Time" is selected and press the controller. The setting is stored for the remote control currently in use. Setting date Driving tips Reference Mobility Communications Entertainment Navigation 1. Select "Date" and press the controller. 4. Turn the controller until "Set time" is selected and press the controller. 2. Select "Set date" and press the controller. The first section of the date display is selected, in this case the month. 3. Turn the controller to make the adjustment. 4. Press the controller to apply the setting. The next adjustment is selected. 5. Make the remaining adjustments. After the last adjustment, the date is stored. Making settings 1. Turn the controller to set the hours and press the controller. 2. Turn the controller to set the minutes and press the controller. The changed time is stored. Setting date format 1. Select "Date format" and press the controller. 2. Select the desired format and press the controller. The setting is stored for the remote control currently in use. Activating hour signal* You will hear three tones just before the top of each hour. Select "Hour memo" and press the controller. The hour signal is activated. Brightness of Control Display The brightness is automatically adapted to the ambient lighting conditions. However, you can change the base setting. iDrive, for operating principle refer to page 16. 83 Online Edition for Part no. 01 41 0 014 242 - © 08/07 BMW AG Controls 2. Select the desired format and press the controller. At a glance