2008 BMW X6 Owner's Manual - Page 248
2008 BMW X6 Manual
Page 248 highlights
Replacing components Have work on the xenon light unit including changing the bulb carried out only by your BMW Sports Activity Vehicle Center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. Due to the high voltage present in the system, there is a danger of fatal injuries when work is carried out improperly.< Side marker lamps 5-Watt bulb, WY5W XLL 1. Rotate the bulb holder to the left and remove. Parking lamps, roadside parking lamps, and daytime running lamps 35-Watt bulb, H8 The bulb is pressurized. Therefore, wear safety glasses and protective gloves. Otherwise there is a danger of injuries if the bulb is accidentally damaged during replacement.< 1. Turn the cover to the left and remove. 2. Pull the bulb out of the bulb holder and replace. 3. Install in the reverse order. Turn signals, front 24-Watt bulb, PY24W 1. Rotate bulb holder to the left and remove it along with the bulb. 2. Left side of vehicle: Rotate the bulb holder to the right, refer to arrow, and remove. Right side of vehicle: Rotate the bulb holder to the left and remove. 2. Rotate the bulb to the right along with the socket and replace. 3. Install in the reverse order. Tail lamps > Turn signal, backup lamps: 21-watt bulb, H21W > Brake lamps, brake force display: 21-watt bulb, P21W 3. Disconnect plug and replace bulb. 4. Install in the reverse order. > Rear lamp: LED technology. In case of a defect, please go to a BMW Sports Activity Vehicle Center or a workshop that works according to BMW repair 246 Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG