2008 BMW X6 Owner's Manual - Page 56

Transporting children safely Unlocking safety belt 1. Open the belt buckle. 2. Remove the child restraint system. 3. Allow the belt webbing to be pulled in completely. LATCH child restraint fixing system LATCH: Lower Anchor and Tethers for CHildren. Follow the system manufacturer's instructions on installation and use of LATCH child restraint systems; otherwise, their protective function may be reduced.< Before attaching the child's seat, pull the belt away from the region of the child restraint fixing system. Make sure that the LATCH mounts have properly clicked into place and that the child restraint system is resting snugly against the backrest. Otherwise, the protective action may be reduced.< For child restraint systems with tether strap, there are two additional attachment points on the back of the rear seat backrests, refer to arrows. Placement of tether strap Make sure that the tether strap is not routed over sharp edges and does not twist on its way to the attachment point; otherwise, the belt cannot properly secure the child restraint system in the event of an accident.< The mounts for the LATCH anchors are located at the points indicated by the arrows. Child restraint system with tether strap Only use the top tether mounting points to secure child restraint systems, otherwise the mounting points could be damaged.< 1 2 3 4 5 6 54 Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG Direction of travel Head restraint Tether strap hook Mounting point Backrest Tether strap of child restraint system