2008 BMW X6 Owner's Manual - Page 65

2008 BMW X6 Manual

Page 65 highlights

> Downshifting: press on one of the shifting paddles, arrows -. Upshifts and downshifts are executed only when they will result in a plausible combination of engine and vehicle speed; thus, for example, a downshift that would cause the engine to overrev will not be executed by the system. The selected gear is briefly displayed in the instrument panel, followed by the current gear. 2. Open the cover in the bottom of the cup holder with the releasing tool from the onboard tool kit, page 245, refer to arrow 2. 3. If necessary, unlock the lock* with the integrated key of the remote control, refer to page 28, and remove it. 4. Insert the releasing tool into the opening, arrow 3. Manually releasing and engaging transmission lock In case of a power failure, e.g. when the battery is drained or disconnected, or an electrical malfunction, the transmission lock must be manually released, as otherwise the rear wheels are blocked and the vehicle cannot be towed.< Step on the brake when manually releasing the transmission lock; otherwise, there is a danger of the vehicle rolling.< The transmission lock should only be released for towing. Reengage the transmission lock after parking the vehicle at its destination. If it also becomes necessary to manually release the parking brake, follow this sequence: 1. Secure the vehicle against rolling. 2. Manually release the parking brake, refer to page 60. 3. Manually release the transmission lock of the automatic transmission. 5. Turn the releasing tool as far as possible, arrow 4, and then press downward and leave it in. The transmission lock is released. Engage the transmission lock after parking the vehicle at its destination. Otherwise there is a danger of the vehicle rolling.< Locking Releasing 1. Slide back the cover of the cup holder and remove the floor mat on the bar between the cup holders, arrow 1. 1. Pull out the releasing tool. The transmission lock is engaged again. 2. If necessary, insert the lock* and lock it. 3. Close the cover in the bottom of the cup holder and lay in the mat again. 4. Close the cover of the cup holder and stow the releasing tool. Information on jump starting and towing, from page 253. 63 Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG Reference Mobility Communications Entertainment Navigation Driving tips Controls At a glance

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288

Controls
63
Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
>
Downshifting: press on one of the shifting
paddles, arrows
.
Upshifts and downshifts are executed only
when they will result in a plausible combination
of engine and vehicle speed; thus, for example,
a downshift that would cause the engine to
overrev will not be executed by the system. The
selected gear is briefly displayed in the instru-
ment panel, followed by the current gear.
Manually releasing and engaging
transmission lock
In case of a power failure, e.g. when the
battery is drained or disconnected, or an
electrical malfunction, the transmission lock
must be manually released, as otherwise the
rear wheels are blocked and the vehicle cannot
be towed.
<
Step on the brake when manually releas-
ing the transmission lock; otherwise,
there is a danger of the vehicle rolling.
<
The transmission lock should only be released
for towing. Reengage the transmission lock
after parking the vehicle at its destination.
If it also becomes necessary to manually
release the parking brake, follow this sequence:
1.
Secure the vehicle against rolling.
2.
Manually release the parking brake, refer to
page
60
.
3.
Manually release the transmission lock of
the automatic transmission.
Releasing
1.
Slide back the cover of the cup holder and
remove the floor mat on the bar between
the cup holders, arrow
1
.
2.
Open the cover in the bottom of the cup
holder with the releasing tool from the
onboard tool kit, page
245
, refer to arrow
2
.
3.
If necessary, unlock the lock
*
with the inte-
grated key of the remote control, refer to
page
28
, and remove it.
4.
Insert the releasing tool into the opening,
arrow
3
.
5.
Turn the releasing tool as far as possible,
arrow
4
, and then press downward and
leave it in. The transmission lock is
released.
Engage the transmission lock after park-
ing the vehicle at its destination. Other-
wise there is a danger of the vehicle rolling.
<
Locking
1.
Pull out the releasing tool.
The transmission lock is engaged again.
2.
If necessary, insert the lock
*
and lock it.
3.
Close the cover in the bottom of the cup
holder and lay in the mat again.
4.
Close the cover of the cup holder and stow
the releasing tool.
Information on jump starting and towing, from
page
253
.