2008 BMW X6 Owner's Manual - Page 66

Driving Turn signals/headlamp flasher/high beams 5. Change to upper field if necessary. Turn the controller until "Lighting" is selected and press the controller. 1 2 3 High beams Headlamp flasher Turn signals 6. Select "Triple turn signal" and press the controller. Triple turn signaling is activated. The setting is stored for the remote control currently in use. Using turn signals Press the lever beyond the resistance point. To switch off manually, press the lever up to the resistance point. Atypically rapid flashing of the indicator lamp indicates that a turn signal bulb needs to be replaced.< Washer/wiper system Signaling briefly Press lever to resistance point and hold for as long as you wish to signal. Triple turn signal activation Press the lever up to the resistance point. The turn signal flashes three times. You can activate or deactivate this function. iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Vehicle / Tires" and press the controller. 1 2 3 4 5 Switching on wipers Switching off wipers or brief wipe Rain sensor activation/deactivation Cleaning windshield and headlamps* Adjusting sensitivity of rain sensor Switching on wipers Pull the lever upward, arrow 1. The lever automatically returns to its initial position when released. Normal wiper speed Press once. The system reverts to operation in the intermittent mode when the vehicle is stationary. 64 Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG