2008 BMW X6 Owner's Manual - Page 50

Adjusting The calibration is completed when the message on the Control Display disappears. Should this message continue to be displayed, repeat the calibration. If the message does not disappear even after repeated calibration, have the system checked as soon as possible. Never carry out calibration while the vehicle is moving, as this can cause accidents. Make sure that no persons or objects become wedged during the calibration process, as this can cause injuries or damage.< 4. Move the controller to the left or right to select "Driver" or "Passenger". Seat heating* Front 5. Turn the controller. The adjustment is applied; the field can be changed. Rear The temperature setting progresses one step through its control sequence each time you press the button. The maximum temperature is supplied when three LEDs are lit. To switch off: press the button longer. The temperature is reduced, if need be, down to no heat in order to reduce the load on the battery. The LEDs remain lit. Operation similar to front seat heating; without temperature distribution. Active seat ventilation* and seat heating* Front Temperature distribution* The heat output can be distributed variously in the seat cushion and the backrest. iDrive, for operating principle refer to page 16. 1. Open the start menu. 2. Move the controller to the left to open "Climate". 3. Select "Seat heater distribution" and press the controller. 1 2 Seat heating Active seat ventilation 48 Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG