1998 Chevrolet Blazer Owner's Manual - Page 177
1998 Chevrolet Blazer Manual
Page 177 highlights
The player automatically senses the cassettetape is metal if or CrO2 and adjusts for best playback sound. For metal the double-D symbol will appear on the display. Anytime a cassette tape is inserted, the top side is selected for play first. (5): Press this pushbutton to turn Dolby on andoff. Dolby is active when a tape is inserted in the remote tapes, cassette. The double-D symbol will appear on the display. PREV (1): Press PREV or the SEEK left arrow (in the opposite direction that the lighted tape direction arrow points) to search for the previous selection. A minimum three-second blank gap is needed the player to stop for at the beginning of selection. The tape direction the arrow will blink duringthe SEEK operation and the sound is muted in this mode. NEXT (3): Press NEXT or the SEEK right arrow (in the direction that the lighted tapedirection arrow points) to search for the next selection. The tape direction arrow will blink during SEEK operation the sound is and muted in this mode. REV (4): Press this buttonto rapidly reverse thetape. The tape will rapidly reverseto the beginning of the cassette reel or until you press REVagain. The radio plays the last selected station during REV. Dolby Noise Reduction is manufactured under a license from Dolby Laboratories Licensing Corporation. Dolby and the double-D symbolare trademarks of Dolby Laboratories Licensing Corporation. FWD (6): Press this button to rapidly advance the tape. The tape will rapidly advance to the end of the cassette reel or until you press FWDagain. The radio plays the last selected station during FWD. PROG: Press this button on the remote player to go from one side of the tape to the other. TAPE: Press the AM-FM button to switch from the player and the radio when a tape playing. To return to is the tape player, pressCD AUX. The lighted arrow will appear next to the symbol and show the direction play of when a tape isactive. EJECT Press this button on the remote player to remove the tape. EJECT can be used witheither the ignition or radio off. Also, you must press EJECT before loading a cassette with the radio off to allow loading. 3-25