2012 Chevrolet Avalanche Owner's Manual - Page 123

Storage 4-9 Then lower the rear of the cover to engage the striker pegs (A) to align with the striker assembly (B). To reinstall a cargo panel: 1. Starting with cargo panel 1, place the latches in the unlocked position. Place cargo panel 1 on the cargo area rails while holding the back of the cargo panel up. Driver Side Shown, Passenger Side Similar 2. Place the cover on the cargo box within 10 cm (4 in) of the Midgate and lower the rear of the panel within 5‐8 cm (2‐3 in) from the top of the cargo box. Push the cover forward making sure that the guide block engages the retainer bracket opening. Continue to push forward until the panel is fully seated against the Midgate. 3. The driver side cargo cover panel latch must lock in place before the passenger side latch can be locked. If this procedure is not followed exactly, the cargo cover panels might not correctly lock in place. Push the driver side latch toward the front of the vehicle to lock the cover in position. A click sounds when