2012 Chevrolet Avalanche Owner's Manual - Page 49

Keys, Doors, and Windows Raising the Midgate To return the Midgate to its normal position, raise the Midgate up with a firm swinging motion until it latches into place securely. This will help to ensure that the Midgate closes with enough force to engage the latches. If the rear glass is removed and you would like to put it back, do so using the instructions given previously. Midgate Lowered with Crossbar Attached This procedure works the same as the procedure described previously, but when you lower the Midgate with the rear glass in the stored position, you will notice that the entire crossbar will lower with the Midgate. This is completely normal; however, since the crossbar lowers with the Midgate, it will be heavier. As you lower the Midgate be ready for the extra weight and do not let the Midgate fall as you lower it. 2-15 WARNING (Continued) Be sure everyone in your vehicle is in a seat and using a safety belt properly. Use the Remote Keyless Entry (RKE) transmitter or power door lock switch to lock and unlock the tailgate. Open the tailgate by lifting up on its handle while pulling the tailgate toward you. To close the tailgate, push it firmly upward until it latches. Push and pull on the tailgate to be sure it is latched securely. Tailgate { WARNING It is extremely dangerous to ride on the tailgate, even when the vehicle is operated at low speeds. People riding on the tailgate can easily lose their balance and fall in response to vehicle maneuvers. Falling from a moving vehicle may result in serious injuries or death. Do not allow people to ride on the tailgate. (Continued) Tailgate Removal The tailgate is not to be removed. Removing the tailgate may cause damage to electrical connector resulting in loss of lock/unlock and rear vision camera function.