2012 Chevrolet Avalanche Owner's Manual - Page 303

Driving and Operating Vehicles with Navigation System The RVC system is designed to help the driver when backing up by displaying a view of the area behind the vehicle. When the vehicle is shifted into R (Reverse), the video image appears on the navigation screen. After a delay, the navigation screen displays the last screen after the vehicle is shifted out of R (Reverse). Turning the RVC System On or Off To turn the RVC system on or off: 1. Shift into P (Park). 2. Press MENU to enter the configure menu options. Turn the Multifunction knob until the Display feature is highlighted and press the Multifunction knob. Or press the Display screen button 3. Select the Rear Camera Options screen button. The Rear Camera Options screen displays. Adjusting the Brightness and Contrast of the Screen 9-53 To adjust the brightness and contrast of the screen, press the MENU button while the RVC image is on the display. Any adjustments made will only affect the RVC screen. 4. Select the Video screen button. When the Video screen button is highlighted the RVC system is on. The delay that is received after shifting out of R (Reverse) is approximately 10 seconds. The delay can be canceled by performing one of the following: . ] (Brightness): Touch the + (plus) or - (minus) screen buttons to increase or decrease the brightness of the screen. _ (Contrast): Touch the + (plus) or - (minus) screen buttons to increase or decrease the contrast of the screen. Symbols The navigation system may have a feature that allows for viewing parking assist symbols on the navigation screen while using the RVC. The Ultrasonic Rear Park Assist (URPA) system must not be disabled to use the caution symbols. If URPA has been disabled and the symbols have been turned on, the Pressing a hard key on the navigation system. Shifting in to P (Park). Reach a vehicle speed of 8 km/h (5 mph). . .