2012 Chevrolet Avalanche Owner's Manual - Page 367
2012 Chevrolet Avalanche Manual
Page 367 highlights
Vehicle Care To replace one of these bulbs: 1. Using a small flat-bladed tool, insert the blade end at the back edge of the rear license plate lamp housing (A). 2. Gently push forward while lifting the back edge of the lamp housing from the bumper opening. 3. Turn the bulb socket (C) one‐quarter turn to release the bulb socket from the lamp housing (A). 4. Pull the bulb (B) from the bulb socket (C). 5. Reverse the steps to install. 10-37 Replacement Bulbs Exterior Lamp Back-up Lamp License Plate Lamp Rear Turn Signal Lamp, Taillamp, and Stoplamp Sidemarker Lamp Bulb Number 7441 168 3057K 194LL Electrical System Electrical System Overload The vehicle has fuses and circuit breakers to protect against an electrical system overload. When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circuit until the current load returns to normal or the problem is fixed. This greatly reduces the chance of circuit overload and fire caused by electrical problems. Fuses and circuit breakers protect power devices in the vehicle. Replace a bad fuse with a new one of the identical size and rating. If there is a problem on the road and a fuse needs to be replaced, the same amperage fuse can be borrowed. Choose some feature of the vehicle that is not needed to use and replace it as soon as possible. For replacement bulbs not listed here, contact your dealer.