2012 Chevrolet Colorado Owner's Manual - Page 106

3-58 Seats and Restraints 5. If the child restraint manufacturer recommends using a top tether anchor, attach the top tether on the child restraint to the top tether anchor on the vehicle. Route the top tether according to the child restraint instructions and the following instructions: The lap belt would be used to secure a child restraint in this position, following the instructions that came with the child restraint. 1. Adjust the driver seat to the desired position. Fold the armrest up, if equipped. 2. Move the passenger seat so that the seat and seatback are aligned with the driver seat and seatback positions. See Seat Adjustment on page 3‑3 or Power Seat Adjustment on page 3‑3 and Reclining Seatbacks on page 3‑4 for more information. 3. Make the center position lap belt as long as possible by tilting the latch plate and pulling it along the belt. 4. Place the child restraint on the seat. 5.3. Attach the top tether to the slots in the back panel as shown. Do not tighten the top tether at this time. 6. Pick up the latch plate on the center position lap safety belt, and run the lap safety belt through the restraint. The child restraint instructions will show you how. 5.1. Pull on the finger access tab to remove the cover to access the top tether anchor. 5.2. Route the top tether over the center seatback or folding armrest, if equipped.