2012 Chevrolet Colorado Owner's Manual - Page 226

9-44 Driving and Operating 3. Shift the transmission to N (Neutral), or press the clutch pedal for vehicles with a manual transmission. 4. Press the button for the desired transfer case shift position (Two-Wheel High, Four-Wheel High, or Four-Wheel Low). 5. After the transfer case has shifted out of N (Neutral), the indicator light will go out. 6. Release the parking brake. 7. Shift the transmission to the desired position. 7. Turn the engine off by turning the key to ACC/ACCESSORY. 8. Place the transmission shift lever in P (Park), or 1 (First) for vehicles that have a manual transmission. 9. Turn the ignition to LOCK/OFF. Shifting Out of Neutral After towing the vehicle, you will have to shift out of N (Neutral) in order to drive. To shift out of N (Neutral), do the following: 1. Set the parking brake and apply the regular brake pedal. 2. Start a vehicle with an automatic transmission in P (Park). Use 1 (First) for vehicles with a manual transmission. Brakes Antilock Brake System (ABS) This vehicle has the Antilock Brake System (ABS), an advanced electronic braking system that helps prevent a braking skid. When the engine is started and the vehicle begins to drive away, ABS checks itself. A momentary motor or clicking noise might be heard while this test is going on, and it might even be noticed that the brake pedal moves a little. This is normal. If there is a problem with ABS, this warning light stays on. See Antilock Brake System (ABS) Warning Light on page 5‑16.