2013 Chevrolet Equinox Owner Manual - Page 236

9-42 Driving and Operating 2. Press the CONFIG button. 3. Select Display. 4. Select Rear Camera Options. 5. Select Camera. When a check mark appears next to the Camera option, then the RVC system is on. Symbols The RVC system may have a feature that lets the driver view symbols on the radio screen while using the RVC. The Ultrasonic Rear Park Assist (URPA) system must not be disabled to use the caution symbols. The error message Rear Parking Assist Symbols Unavailable may display if URPA has been disabled and the symbols have been turned on. See Ultrasonic Parking Assist on page 9‑40. The symbols appear and may cover an object when viewing the radio screen when an object is detected by the URPA system. To turn the symbols on or off: 1. Shift into P (Park). 2. Press the CONFIG button. 3. Select Display. 4. Select Rear Camera Options. 5. Select Symbols. When a check mark appears next to the Symbols option, symbols will appear. Guidelines The RVC system may have a guideline overlay that can help the driver align the vehicle when backing into a parking spot. To turn the guidelines on or off: 1. Shift into P (Park). 2. Press the CONFIG button. 3. Select Display. 4. Select Rear Camera Options. 5. Select Guidelines. When a check mark appears next to the Guidelines option, guidelines will appear. WARNING (CONTINUED) injury, death, or vehicle damage. Always check behind and around the vehicle before backing. An image appears on the radio screen when the vehicle is shifted into R (Reverse). The radio screen goes to the previous screen after approximately 10 seconds once the vehicle is shifted out of R (Reverse). To cancel the delay, do one of the following: . Press a hard key on the navigation system. Shift into P (Park). Reach a vehicle speed of 8 km/h (5 mph). . . Turning the Rear Vision Camera System On or Off To turn the rear vision camera system on or off: 1. Shift into P (Park).