2013 Chevrolet Equinox Owner Manual - Page 279

Vehicle Care 10-27 Bulb Replacement For the proper type of replacement bulbs, see Replacement Bulbs on page 10‑30. For any bulb changing procedure not listed in this section, contact your dealer. 3. Park/Turn Signal Lamp 4. Side Marker Lamp To replace: 1. Turn the tire to reach the access port cap located on front of wheel well cover. 3. If replacing low/high headlamp bulb, remove the dust cover cap from the back of the headlamp housing by turning the cap counterclockwise. 4. Turn the bulb socket counterclockwise to remove from lamp assembly. 5. Remove the bulb from the socket or disconnect bulb assembly from harness connector. 6. Install new bulb. 7. Reinstall the lamp socket to lamp assembly turning clockwise. 8. Replace the dust cover cap on headlamps. Headlamps, Front Turn Signal, Sidemarker, and Parking Lamps 2. Remove screw (1) and turn access port cap (2) counterclockwise to remove. 9. Reinstall the wheel well cover access port cap and secure by installing screw. 1. Low Beam Headlamp 2. High Beam headlamp