2013 Chevrolet Equinox Owner Manual - Page 281

Vehicle Care 10-29 License Plate Lamp 1. Bulb Socket 2. Bulb 3. Lamp Assembly To replace one of these bulbs: 1. Open the liftgate partway. See Liftgate on page 2‑8. 2. Push the left end of the lamp assembly toward the right. 3. Pull the lamp assembly down to remove it from the liftgate. 6. Turn the bulb socket counterclockwise and pull it out. 7. Pull the bulb straight out of the socket. 8. Install the new bulb. 9. Push the bulb socket in and turn it clockwise. 10. Reverse steps 2-5 to reinstall lamp assembly. Lamp Assembly 4. Turn the bulb socket (1) counterclockwise to remove it from the lamp assembly (3). 5. Pull the bulb (2) straight out of the bulb socket (1). 6. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install it into the lamp assembly. 7. Push the lamp assembly into the liftgate engaging the clip side first. Bulb Assembly