2014 Chevrolet SS Owner Manual - Page 218

7-82 Infotainment System Using the "Digit Dial" Command This allows a phone number to be dialed by entering the digits one at a time. 1. Press b / g. The system responds "Please say a command," followed by a tone. 2. Say "Digit Dial." 3. Say each digit, one at a time, to dial. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say "Dial." If an unwanted number is repeated back, say "Clear" to clear the last number. Once connected, the person called will be heard through the audio speakers. Using the "Redial" Command 1. Press b / g. The system responds "Please say a command," followed by a tone. 2. After the tone, say "Redial." The system dials the last number called from the connected cell phone. Once connected, the person called will be heard through the audio speakers. Using the "Dial" or "Call" Command To call a number: 1. Press b / g. The system responds "Please say a command," followed by a tone. 2. Say "Dial" or "Call." 3. Say the entire number without pausing, followed by "Dial." Once connected, the person called will be heard through the audio speakers. To call using a name tag: 1. Press b / g. The system responds "Please say a command," followed by a tone. 2. Say "Dial" or "Call" and then say the name tag. For example "Call John at Work." Once connected, the person called will be heard through the audio speakers. Clearing the System Unless information is deleted out of the vehicle Bluetooth system, it will be retained. This includes phone pairing information. For directions on how to delete this information, see "Deleting a Paired Phone/ Device." Text Messaging For vehicles equipped with Bluetooth capability, the system, if equipped with text messaging, can display text messages, play back a message over the audio system, and send a predefined message. Not all phones support all functions and work with Bluetooth. The radio only supports the receipt of SMS