2014 Chevrolet SS Owner Manual - Page 343
2014 Chevrolet SS Manual
Page 343 highlights
Vehicle Care 6. Attach the air only hose (4) onto the tire valve stem and press the lever down to secure it. 7. Plug the power plug (6) into the accessory power outlet in the vehicle. Unplug all items from other accessory power outlets. See Power Outlets on page 5-4. If the vehicle has an accessory power outlet, do not use the cigarette lighter. If the vehicle only has a cigarette lighter, use the cigarette lighter. Do not pinch the power plug cord in the door or window. 8. Start the vehicle. The vehicle must be running while using the air compressor. 9. Switch the on/off switch (1) to the I position. The compressor will inflate the tire with air only. 10. Inflate the tire to the recommended inflation pressure using the pressure gauge (2). The recommended inflation pressure can be found on the Tire and Loading Information label. See Tire Pressure on page 10-41. The pressure gauge (2) may read higher than the actual tire pressure while the compressor is on. Turn the compressor off to get an accurate reading. The compressor may be turned on/ off until the correct pressure is reached. 11. Switch the on/off switch (1) to the O position. Be careful while handling the tire sealant and compressor kit as it could be warm after usage. 12. Unplug the power plug (6) and the air only hose (4). 13. Replace the tire valve stem cap. 10-61 14. Place the equipment in the original storage location in the vehicle. Removal and Installation of the Sealant Canister After repairing a tire, replace the tire sealant canister. To remove the sealant canister: 1. Unlock the air only hose (4) from the tire sealant canister (3) by pulling up on the lever. 2. Pull the air only hose (4) from the tire sealant canister (3). 3. Unwrap the sealant/air hose (5) from the air compressor.
![](/manual_guide/autos/Chevrolet-2014-SS-Sedan-Owner-Manual-340cb9/343.png)